Metal Etch Services
Comprehensive metal etch services: photo etching, chemical etching and acid etching for industrial parts, nameplates, screens, filters and stencils.
What this service covers
Metal Etch Services is carried out by photo etching. A photographic resist is applied to the metal sheet, the pattern is transferred by exposure and development, and the unprotected metal is dissolved by a controlled etchant. The result is burr free detail, repeatable tolerances and no tooling cost for complex shapes, which makes it well suited to prototypes, short runs and intricate geometries that are difficult to machine.
Materials we etch
We etch brass, copper, aluminium, 304, 316 and 302 stainless steel, nickel, titanium and low carbon steel. For every material we select the etchant and process window that avoids distortion, hydrogen embrittlement and excessive undercut, so hole size, wall thickness and flatness stay within specification across the batch.
Industries served
Industrial equipment and instrumentation, automotive and rail, electronics and control panels, oil and gas filtration, architecture and interior decoration, medical and laboratory equipment, and identification and signage. Parts are commonly supplied as nameplates, data plates, screens, meshes, filters, gaskets, stencils, shims, washers and decorative panels.
Key technical parameters
Etched thickness typically ranges from 0.05 mm to 1.0 mm. Minimum feature width and minimum web depend on material and thickness, and we confirm manufacturability against your drawing before tooling. Tolerance on the etched profile is typically plus or minus 0.1 mm to 0.2 mm depending on part size and process. Parts are supplied deburred, cleaned, and passivated where the material and application require it.
How to request a quotation
Send the drawing in DXF, DWG, STEP or PDF format together with the material and grade, the thickness, the quantity and the required delivery date. We will confirm feasibility, propose the process and return a quotation. Sample lead time is typically 3 to 7 working days, and batch production timing depends on volume and current capacity. Drawings are treated as confidential and are not shared with third parties.
Read the frequently asked questions below for materials, tolerances, lead times and ordering.
Related resources
Metal Etch Services — FAQ
What metal etch services do you provide?
We provide photo etching, chemical etching and acid etching across brass, copper, aluminium, stainless steel, nickel and titanium. Typical products are nameplates, data plates, screens and meshes, filters, stencils, gaskets, shims, washers, decorative panels and structural parts.
Can you handle both flat and formed parts?
Yes. Flat parts are etched directly. Formed components are normally etched flat and formed afterwards, which avoids distortion of the etched pattern. Tell us the end form and we will confirm the production route.
Do you only work to customer drawings?
Almost always yes, because a photo etched part is unique to its artwork. If you have a concept rather than a drawing, we can help convert it into a manufacturable artwork and give feedback on which features are achievable in the material and thickness you have in mind.
What industries do you supply?
Industrial equipment and instrumentation, automotive and rail, electronics and control panels, oil and gas filtration, architecture and interior decoration, medical and laboratory equipment, and identification and signage.
How long does a repeat order take?
Once the artwork and process are approved, repeat batches are straightforward and typically ship in the same timeframe as the first production run, subject to material availability and current capacity. Lead time for a new part is typically 3 to 7 working days for samples.