Custom etched metal nameplates

Etched metal nameplates carry text, logos and data that are chemically dissolved into the metal, so the marking cannot peel, rub off or fade. Golden Eagle has manufactured custom etched nameplates since 2003 in stainless steel, brass, aluminum and other metals, from single prototypes to production batches, with paint filling, colour finishes and individual serial numbers.

Four custom etched metal nameplates in brushed stainless steel, brass and aluminum with etched logos and text
Etched nameplates in stainless steel, brass and aluminum.

Choose by material

MaterialBest forTypical finishesDetails
Stainless steel 304 / 316Outdoor, marine, chemical and food equipment; the longest service lifeBrushed, mirror, paint filled, PVD colourStainless steel etched nameplates
BrassDecorative plates, instruments, plaques and traditional equipment platesPolished, brushed, antique, paint filled, platedBrass etched nameplates
AluminumLight, low-cost equipment and rating plates in volumeAnodised after etching, brushed, paint filledEtched aluminum nameplates
Copper, bronze, titaniumPlaques, premium branding and special environmentsPolished, patinated, paint filledBronze plaques

Choose by use

Etched nameplate specifications

ItemWhat we offer
MaterialsStainless steel 304 and 316, brass, aluminum, copper, bronze, titanium
ThicknessSheet from 0.05 mm to 5.0 mm; most nameplates are 0.3 mm to 2.0 mm
Etch depthSurface etch for fine marking, or deep etch (typically 0.1 mm to 0.3 mm) for paint filling
DetailFine text, logos, scales, tables and line work reproduced from your artwork
OutlineAny shape, with holes, slots and rounded corners etched in the same run
ColourOne or more paint-fill colours; PVD colour on stainless steel; anodising on aluminum
Variable dataSerial numbers, barcodes and QR codes, different on every plate
MountingScrew or rivet holes, or plain backs for adhesive or welding by the customer
QuantityFrom one sample to production batches; no hard tooling
Lead timeSamples typically 3 to 7 working days
Etched and black paint filled metal data plate with a logo and fields for model, number, power, frequency and voltage
An etched and paint filled data plate with blank fields for stamping.

How etched nameplates are made

  1. Artwork check. We review your file and send a proof showing text, colours and hole positions.
  2. Imaging. The cleaned sheet is coated with photoresist and the artwork is exposed onto it with UV light.
  3. Etching. Unprotected metal is dissolved to the required depth. The outline and holes are etched through at the same time.
  4. Finishing. Recesses are paint filled if required, then the surface is brushed, polished, coloured or anodised.
  5. Inspection and packing. Plates are checked against the proof and packed with protective film or interleaving.

The same process is also called photo etching, photochemical etching, acid etching, chemical engraving or chemical milling. See the etching process step by step.

Why choose etched nameplates

  • Permanent. The marking is in the metal, not on it. It survives abrasion, solvents, weather and repainting.
  • Fine detail. Small text, thin lines and logos are reproduced exactly from the artwork.
  • No tooling cost. A design change needs a new phototool, not a die, so short runs and many variants are economical.
  • Burr-free and flat. No stamping stress, so thin plates stay flat.

For a side-by-side comparison with laser engraving, mechanical engraving, printing and stamping, see etched vs engraved vs printed nameplates.

Request a quote

Send the artwork or drawing (AI, PDF, DXF or DWG) with the material, thickness, size, quantity, finish, colours and mounting method through our contact page. For serialised plates, send the number range or a data file. We return a proof for approval before production. Sample lead time is typically 3 to 7 working days. Artwork and drawings are treated as confidential.

More on etched nameplates

Etched metal nameplates: FAQ

What is an etched metal nameplate?

It is a metal plate on which text, logos and data are chemically dissolved into the surface through a photoresist mask. Because the marking is recessed into the metal, it does not wear off like print.

Which metal is best for an etched nameplate?

Stainless steel for outdoor, marine and chemical environments and the longest life; aluminum for light, economical plates in volume; brass for a decorative or traditional appearance.

Can etched nameplates be coloured?

Yes. Etched recesses can be filled with one or more enamel paint colours, stainless steel can be PVD coloured, and aluminum can be anodised after etching.

Can each nameplate have a different serial number?

Yes. Serial numbers, barcodes and QR codes can be different on every plate. Send the number range or a data file with the artwork.

Is there a minimum order quantity?

There is no hard tooling, so a single sample or a small batch is practical. The price per plate falls as quantity rises because more plates are nested on each sheet.

What file do you need to make a nameplate?

Vector artwork in AI, PDF, DXF or DWG format is best, together with the material, thickness, size, quantity, finish and colours. We send a proof for approval before production.

Scroll to Top